Lime & Hygrothermal Renders
Tradical Hygrothermal render is a hemp render with insulating properties.
It can be applied indoors and outdoors, on all kinds of clean and sound substrates, and is compatible with a wide variety of finishes Lightweight insulating render
Rectifies highly uneven surfaces.
Used as brown coats on materials exhibiting low mechanical strength
Considerably improves thermal comfort by increasing surface heat and controlling humidity, especially on cold walls.
Considerably improves acoustics through absorption
Improves thermal inertia
HempKote Panels can be used for insulating floors fitted in between existing joists and Tradical Hempcretes can be used to build insulating screeds
On Solid ground floor thanks to their thermal performance characteristics
On upper story floors owing to their low density as well as their thermal and acoustic performance characteristics
Levelling of existing floors with significant differences in evenness
No excessive load thanks to a very low density, 375 kg/m3 with Tradical PF70
Flexibility that allows for adaptation to possible structural deformations
Insulating roof and unused roof space
Tradical Hempcretes meet the requirement for the construction of Hempcrete Structures: Roof Insulation, and are used within the scope of this page
Chanvribat blended with Tradical THERMO enable you to prepare ultralight mortars to thermally insulate roofs:
In sloping parts prior to installing the roofing
In the depth of the attic floors
On the floors of unused attic spaces
High Thermal performance
A lightweight solution
Standard Tradical Lime Renders
KOSP Construction Resources is a qualified applicator of Lime renders, we recommend a three coat lime render on Hempcrete
Base coat using Tradical PF70 with fibreglass mesh imbedded into 100% of the wall surface
Second coat using Tradical PF70 to fully encase the fibreglass mesh, this eliminates cracking and is far SUPERIOR to standard Lime & sand renders that have a tendencies to crack, examples of shoddy workmanship in WA can be supplied on request
Third & Final Finish coat is a water resistant PF80 that stands the test of time
Colours for Lime Renders
Oxide Pigments can be used in a wide variety of applications where aesthetics are just as important as structural integrity and lime duarility
Colours can be supplied on request.
The oxide pigments that are used are produced using internationally recognised quality control standards.Our full range of oxide pigments are guaranteed UV stable and non fading for use in all interior or exterior applications, when mixed thoroughly through the concrete mix.
KOSP Construction Resources only offers first class service and technical support, and understands the importance of prompt delivery, consistency of supply and expert technical service.
We prefer to go overboard than take shortcuts that are quite common in the industry, we may be more expensive than others or cowboys out there, but at the end of the day, you need to be stress free in knowing that the job has been exceptionally well done, and we can assure you, that you will be completely happy with the finish product and not being disappointed